|
| |
|
|
Construction technology project of polyfunctional building in Brno
Hrabovský, Tomáš ; Nečasová, Barbora (referee) ; Diaz, Yvetta (advisor)
This thesis deals with construction technology project of polyfunctional building on the Štefánikova street in Brno. Building has five overground floors and basement. In relation to the construction technology project it deals with chronological and financial plan, a suggestion of main construction machinery and mechanisms, materiál resources and transport routes, the project of the construcion zone equipment, technological plan and inspection and test plan for monolithic constructions and schedule of work.
|
|
|
Residence Ponavia Brno, Civil technical project
Veselá, Šárka ; Sedlák,, Petr (referee) ; Kovářová, Barbora (advisor)
The diploma thesis deals with construction technological project of a flat house Residence Ponavia. The thesis contains time and financial plan, itemized budget of main object, technical report, site equipment, safety and healt care policy and machine assembly. The thesis focuses on building foundation and bottom floor. Thesis includes technological prescription and control and test plan for mentioned constructional phases.
|
|
|
House with care service
Kleknerová, Kateřina ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
The master thesis is dealing with the constructure of a house with nursing care. It’s four floor cellarless building with flat roof. The strucutural system is a wall system of brick blogs. Ceilings are solved as reinforced concrete floating slab with circuit reinforcing beam.
|
|
|
Design of Monolithic RC Floor Structure
Otáhal, Ondřej ; Zlámal,, Martin (referee) ; Švaříčková, Ivana (advisor)
The aim of bachelor thesis is to dimension and assess reinforced concrete floor slab in a typical storey of multi-purpose building at the ultimate limit state I. The slab is locally supported by reinforced concrete columns and restraint around the perimeter. To address the internal forces is used computing software NEXIS and obtained values are verified using the summation of moments method. Floor slab is reinforced by flexural longitudinal load-bearing reinforcement and around columns is placed shear reinforcement against slab extrusion by column. By calculation is shown that structure meet the resistance to bending and the extrusion. The thesis also includes drawing documentation of proposed solution.
|
|
|
Architectural and technological project of multifunctional building, Old Brno
Hradečný, Štěpán ; Kolečkářová, Barbara (referee) ; Kantová, Radka (advisor)
The diploma thesis deals with the technological stage of the lower structure, namely laying on piled foundations, including laying of a building pit with pilot reinforced concrete walls, and a rough top structure made of reinforced concrete walls, cores and reinforced concrete ceiling structure. The content is a technical report, solutions of wider transport relations, time and financial planning, studies of the main technological stages, equipment of the construction site of solved stages, design of the main building machines and mechanisms, technological regulations, control and test plans, safety and health protection at work, , thermal engineering assessment of selected constructions, budget, staff deployment balance, work progress scheme.
|
|
|
Girder bridge in Český Krumlov
Lindtner, Tomáš ; Klusáček, Ladislav (referee) ; Panáček, Josef (advisor)
The subject of Bachelor’s thesis is the design of the road bridge over the Chvalšinský brook on the road number 39 near Český Krumlov. The main topic is static calculation of one span supporting main structure. Two studies were executed and the first option with the two-girder bridge supporting structure was chosen. Two-girder bridge is 30 meters long and consists with two subsequently pre-stressed concrete girders and reinforced concrete desk. Static model and effects of loadings are solved in software Scia Engineer. Reviews are calculated by hand according to Eurocode. Calculation is made without effects of temperature and wind loads and horizontal forces causing by travel.
|
|
|
Guesthouse
Petrlík, Daniel ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The subject of this diploma thesis is a project of guesthouse. The building is situated in moderate slope terrain in cadastral territory Hlinsko v Čechách. Guest house capacity is 46 beds. Guesthouse has three floors and is designed from the structural system Porotherm. The ceilings are made of reinforced concrete joined with stiffening reinforced concrete wreath. The roofs of the house are built as saddle roof. In the first floor there is located main entrance, reception desk and restaurant with facilities. In the second and third floor there are rooms for guests
|
|
|
Apartment House
Baroň, Alexandr ; Dvořák, Martin (referee) ; Lavický, Miloš (advisor)
Topic of this bachelor's thesis is design of apartment house, located in town of Otrokovice. It is detached building with partial basement, flat roof and it is situated on a slightly sloping terrain. The object is five-storeyed. The first floor serves for technical and storage use. Second, third and fourth storey contains apartment units, always two per floor. The last storey serves as an access to roof and as a elevator machine room. Foundations are strips from plain concrete, vertical framework is from THERM type of blocks, horizontal framework is from reinforced concrete and roof is flat.
|
|
|
Constructive technological project of a business incubator
Sviták, Marek ; Jakubíček, Jiří (referee) ; Diaz, Yvetta (advisor)
The content of the diploma thesis is the processing of a constructive technological project of a business incubator. The objective of this constructive technological project is to approach the construction process in the framework of the study of the implementation of the main technological stages, which closely follows the project of the site construction equipment with suitable layout of its construction, as well as the design of suitable machinery mechanisms for realization of the main building. Part of the project is also to determine the timeliness of work, financial and material management, and technological regulations for implement selected activities, taking into account the quality control and planning of their implementation. The whole construction process is completed in the final part of the diploma thesis on the solution of the occupational health and safety issues.
|
guest ::
